We have started removing the metal strip on the top side of the camper. This metal strip holds the roofing on the edges to the camper. We first removed the rubber gasket and then started removing the screws. However some of the screws stripped out and could not be unscrewed with a screw driver. We had to get a small blade and cut the screws into to remove. You may also have to use a pry bar to help with the removal of these screws. The metal strip on the top of the roof on the front of the camper was also removed. We had to cut the caulking off to remove these screws. We are now ready to remove all of the old roofing membrane. This will be difficult since the membrane is so deterioated that it is in pieces. We will let you know how this goes.